AccuBANKER AB610 Guia Del Usuario página 10

Control Panel Description Cont.
b- BATCH mode (green LED off, P appears on the screen): The user must preset
("P") a BATCH quantity before beginning the count. The equipment will stop every
time the specific batch quantity is reached. The top portion of the screen will show the
quantity of coins counted and the bottom portion will show the batch quantity set up
by the operator. "P" will blink every time the batch is reached. The counting operation
will resume by pressing the START key.
• Batch Keys +1000 / +100 / +10 / +1
These keys are used to set up the desired Batch quantity. Tapping the specific key will
add up that specific quantity to the Batch. For example, if the operator needs to set up
a batch of 2,525 coins, he/she must proceed as follows:
- Tap the key "+1000" twice, the display will show 2000
- Tap the key "+100" five times, the display will show 2500
- Tap the key "+10" two times, the display will show 2520
- Tap the key "+1" five times , the display will finally show 2525
To clear the batch and go back to zero, maintain "C" pressed down, then tap the "+1"
key.
10