Setting Up Your Equipment
5. Thickness and Diameter coin selectors
Before beginning with the counting operation, the user must set up the specific thickness and
diameter for the coin denomination to be counted.
Adjust the Thickness and the Diameter knobs based on the following information:
a. The circular labels show the specific positions for USD coins (D - dimes / P - pennies /
N - nickels / Q - quarters / $ - $1 coin / H - 50 cents).
b. The labels also include marks in millimeters (1 mm steps) as reference for any other
international coin size or tokens.
c. Coins with smaller sizes than the one set up will be rejected.
d. Avoid coins with larger sizes than the one set up since they will be kept inside the hopper.
13