Tabla de contenido
Publicidad
8. Daily Maintenance
1. Turn the power switch OFF when the last count has been completed.
2. Clean the coin track and counting sensor surface. Remove the metallic debris that
may be deposited during the counting operation. (Use an air duster)
3. If the equipment shows a noticeable change in performance or you are experiencing
technical problems, please contact your local dealer for technical support.
Error Codes Description
•
Eb0
error code
Cause - Coins are jammed near the counting sensor.
Solution - Remove adjustment knob cover and remove jammed coins. Replace the
cover and press "C"to clear the error message. Continue the count.
•
Ec0
error code (Stop status)
Cause - Coin passed through the sensor and was not counted
Solution - Press "C" to clear the error message and continue the count
•
E04
error code (security switch open)
Cause - Adjustment knob cover is not correctly closed
Solution - Remove and replace the cover properly
20
Publicidad
Tabla de contenido
