AccuBANKER AB610 Guia Del Usuario página 11

• ADD / LAST key
- ADD function is active when the green LED is on. In this mode, the equipment will add up
every consecutive count to show a final total result. This grand total result is shown on the top
portion of the screen. This applies for both COUNT and BATCH operational modes.
- The LAST count carried out during the adding operation can be verified by maintaining the
the "MEM" key pressed down with the ADD function active (green LED on). The bottom
portion of the screen will show "c xxx" where "xxx" is the last quantity of coins added up to
the current total result.
• C key: Reset counting data to zero
- Used to clear to zero the counting information
- Used to clear to zero the Batch quantity ("CLEAR"+ "+1")
• MEM key : Used to retrieve two types of data from the unit's memory:
1. LAST count during the ADD operation (tapping MEM during the ADD operation).
The screen shows "c
2. Total coins counted since the last time the unit was powered on.
The "ADD/LAST" LED indicator must be off. Press MEM key to show the information on
the top portion of the screen. The display will show "A xxx" where "xxx" will be the total
quantity of coins counted up to this point by the equipment.
Control Panel Description Cont.
xxx".
11