Tabla de contenido
Publicidad
6. Operation
6.1 Basic Counting Operation
The coins to be counted must be pre-sorted before depositing them into the hopper. All of
them must be the same size and thickness in order to ensure a hassle-free count.
1. After installing the hopper tray holders (they will prevent damage to the tray due to
the weight of the coins), connect the unit to the power outlet and turn it on using the
power switch.
2. Adjust both the Diameter and Thickness knobs to the exact setting according to the
size of the coin denomination to be counted.
3. Ensure the lateral rejecting tray / tube as well as the bag to collect the coins is properly
in place.
4. Pour the coins in the internal hopper. Do not exceed capacity. Use the external hopper
if necessary.
5. Press the START key to begin counting.
6. The equipment will stop either when the preset batch amount is reached or by pressing
the START / STOP key again.
14
Publicidad
Tabla de contenido
