Lubrification; Ce Declaration Of Conformity - USAG 942 PB1 Manual Original

PLACING THE MACHINE IN SERVICE

LUBRIFICATION

Always use an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: USAG 930.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm 3 through the machine's inlet connection.
Model Square Impact
drive rate
''
942 PB1 3/8 1750
942 PC2 1/2 1750
Model Free speed
rpm
942 PB1 10500
942 PC2 10500
* k = measurement uncertainty in dB
SWK Utensilerie S.r.l., Sede Operativa VIA VOLTA 3 - 21020 - MONVALLE (VA) ITALY, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE PRODUCT
942 PB1 – USAG 3/8" AIR IMPACT WRENCH , 942 PC2 – USAG 1/2" AIR IMPACT WRENCH
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN 792-6 :2000 +A1:2008
BS EN ISO 12100-1:2003+A1:2009
BS EN ISO 12100-2:2003+A1:2009
EN ISO 15744:2008
EN 28662-1:1993 &BS EN ISO 28927-2:2009
• BEFORE EACH OPERATION, CHECK:
- Only use suitable USAG sockets and flogging spanner accessories, (''IMPACT'') as well as
safety devices, bush and pin for mounting one of these cases on a drilled driving
square.
- The drive square condition (no marks, cracks or excessive wear).
- The condition of the safety devices (bush and pin) on the drilled square as well as the draw
bead on the non-drilled square.
Maximum
dynamic
Pressure dB(A)
torque
N.m k*
710 93,8 1,5
800 93,8 1,5
Air consumption Working pressure
l/min bar
125 6,2
125 6,2
** k = measurement uncertainty in m/s²

CE DECLARATION OF CONFORMITY

CE DECLARATION OF CONFORMITY
EMERGENCY
GATE VALVE
Noise level
Power dB(A) Pressure dB(C)
k*
104,8 1,5 99,5 1,5
104,8 1,5 99,5 1,5
Weight Dimensions
kg mm
1,3 152x67x181
1,4 157x67x181
Vibrations
level
m/s 2
k* k**
3,06 0,79
3,06 0,79
20.10.2011
U
SAG QUALITY MANAGER