Lubrification - USAG 942 PC3 Manual Original

PLACING THE MACHINE IN SERVICE
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: USAG N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
Model Square
drive
''
942 PC3 1/2
Model Free speed
rpm
942 PC3 10000
* k = measurement uncertainty in dB
The serIaL nUmber, whICh aLso InCLUde The year of The manUfaCTUrIng,
Is PrINTINg INTO ThE hOusINg. (AbOvE rATINg PlATE)
EXAMPlE:
16 XXXXXXXXXX
year of manUfaCTUrIng

LUBRIFICATION

• BEFORE EACH OPERATION, CHECK:
- Only use suitable USAG sockets and flogging spanner accessories, (''IMPACT'') as well as
safety devices, bush and pin for mounting one of these cases on a drilled driving
square.
- The drive square condition (no marks, cracks or excessive wear).
- The condition of the safety devices (bush and pin) on the drilled square as well as the draw
bead on the non-drilled square.
Impact Maximum
rate Torque
N.m
1650 861
Air consumption
l/min
127
** k = measurement uncertainty in m/s²
Noise level
Pressure dB(A) Power dB(A)
k*
91,1 3 108,1
Working pressure Weight
bar
6,2
DATE CODE POSITION
EMERGENCY
GATE VALVE
Pressure dB(C)
k* k*
3 < 130 3
Dimensions
kg mm
1,3 111x61,5x173
Vibrations
level
m/s
2
k**
9,57 1,44