Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2
Select the duration, pressing the "+" or "-"
buttons.
3
Subsequently, the symbol A that was
flashing will light, indicating that the oven
will switch itself off automatically.
4
The display will then show the current time.
5
Select a temperature and cooking function.
6
When the set time has elapsed the oven will
disconnect, the
acoustic interval signal will sound and the
symbol A will begin to flash.
7
Press any button to switch off the acoustic
signal, reconnecting the oven.
8
Set the controls in the position
off the oven.
Programming the End of Cooking Time for the
Oven
This function allows to establish the exact
hour, after which the oven will switch itself off.
1
Press the MODE button until the display
automatically switches over between "End"
display and end time setting mode. The
symbol A is flashing.
2
Select the time that cooking is to finish,
pressing the "+" or "-" buttons.
3
Subsequently, the symbol A that was
flashing will light, indicating that the oven
will switch itself off automatically.
4
The display will then show the current time.
5
Select a temperature and cooking function.
6
When the programmed time is reached the
oven will disconnect, the
switch off, an acoustic interval signal will
sound and the symbol A will begin to flash.
7
Press any button to switch off the acoustic
signal and the oven will reconnect.
8
Set the controls to the position
off the oven.
This function may be used even though you are
already cooking in your oven. To do so, follow
the instructions given except Nº 5.
Programming the Duration and Automatic Stop
This function is used to control the duration
and the time at which the oven will turn itself
off. This function allows the oven to start and
stop automatically.
16
symbol will switch off, an
to switch
symbol will
to switch
1
Press the MODE button until the display
automatically switches over between "dur"
display and duration time setting mode.
The symbol A is flashing.
2
Select the duration, pressing the "+" or "-"
buttons.
3
Subsequently, the symbol A that was
flashing will light, indicating that the oven
will switch itself off automatically.
4
Press the MODE button until the display
automatically switches over between "End"
display and end time setting mode. The
symbol A is flashing.
5
Select the time that cooking is to finish,
pressing the "+" or "-" buttons.
6
Subsequently, the symbol A that was
flashing will light, the symbol
off and the oven will remain disconnected.
Your oven is programmed.
7
Select a function and cooking temperature.
8
When the time to begin cooking is reached,
the oven will switch itself on and will continue
cooking during the programmed time.
9
When the programmed finishing time is
reached, the oven will disconnect, an
acoustic interval signal will sound and the
symbol A will begin to flash.
10 Press any button to switch off the acoustic
signal and the oven will reconnect.
11
Set the controls to the position
of the oven.
Caution
Pressing the MODE button the display on the
screen shows any function programmed. It can
be changed by pressing the "+" or "-" buttons.
Program times for automatic programs can be
cleared by pressing "+" and "-" simultaneous-
ly. For clearing warning function, first you must
be select the warning function in the display.
will switch
to switch
mode
Publicidad
Tabla de contenido
