hager G441-30X Manual De Instalación página 39

CALLING A REMOTE SURVEILLANCE NUMBER
Operation made
Programming
the numbers to be dialled
Recording the
identification number
Programming
the cycle call
Drop-down menu shown
Programming
Call number prog
Call number prog
# 1
# 1
Monitoring
# 1
without ack
# 1
listening in OFF
# 1
Call back OFF
# 1
Not in use
Enter 20char max
–
Programming
CS Digi Chip No.
CS Digi Chip No.
– – – – – – – –
Programming
Periodic call
1 st call DDMMhhmm
– – – – – – – –
Period: DDhhmm
– – – – – – – –
2 calls maximum
– –
Steps to be followed
• Press (OK) to validate
• Use keys to choose among call memories Nr1 to Nr9
L M
• Press (OK) to validate
• Choose Remote surveillance by using keys
• Press (OK) to validate
• Use keys to turn ON/OFF the acknowledgement option
L M
• Press (OK) to validate
• Use keys to turn ON/OFF listening
L M
• Press (OK) to validate
• Use keys to turn ON/OFF the call-back option
L M
• Press (OK) to validate
• Choose the transmission protocol by using keys L M among:
- Not in use
- Contact ID
- Ademco
- ViewCom IP
• Press (OK) to validate
• Programme the phone number (max. 20 digits)
• Press (OK) to validate
• Press (OK) to validate
• Programme the identification number:
- protocol Contact ID (4 digits)
- protocol Ademco (4 digits)
- protocol ViewCom IP (4 digits to 8 digits)
• Press (OK) to validate
• Press (OK) to validate
• Programme date and time for the first call of the cycle
• Press (OK) to validate
• Programme the frequence for the call cycle
• Press (OK) to validate
• Select phone numbers (1 for Nr1, 2 for Nr2)
to be allocated to the call cycle
• Press (OK) to validate
39
G
L M