Mode Of Operation - Cooper Lighting MS245 Manual De Instrucciones

Mode of
operation:
Dusk to Dawn Setting
Override Mode
(activated only at night)
Lights should stay on 100%
brightness from dusk to dawn
and then reset to the AUTO or
NIGHT TIME ON setting next
dawn.
Continuous Override Mode
(standard floodlight setting)
Lights should stay on
continuously both day and night
(must be reset manually).
Return to Auto
or NIGHT TIME ON Settings
(motion activated)
From any of the above
settings.
WHAT TO DO IF. . .
OUTDOOR LIGHTS DO NOT
COME ON WITH MOTION AT
NIGHT
OUTDOOR FLOODLIGHT
COMES ON FOR NO
APPARENT REASON
AT NIGHT
Call for customer service and/or missing or damaged parts (800-334-6871)
Set slide switch
on sensor to:
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME ON MODES
TEST
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME ON MODES
Is there power to the fixture?
• Check to see that the circuit breaker has not been tripped.
• Be sure the wall switch is in the "ON" position.
• Be sure that the bulbs are not burned out or broken.
Is the surrounding external ambient light too bright? (If so, the
unit may think itʼs daytime.)
• Re-aim the head.
• Relocate or reposition the unit away from the light.
TURN OFF POWER BEFORE CONTINUING.
Is the wiring to the fixture loose?
• Check wiring, and reconnect if necessary using wire nuts
provided.
Is there motion in the detection zone?
• Make sure the sensor is not picking up moving objects
such as trees, traffic, etc.
TEST FOR YOURSELF
• Cover the sensor lens with cardboard to prevent sensor
from detecting motion. If the lights stay off, something in
the detection zone is triggering the sensor.
• If this is the case, reduce the sensitivity.
• Reposition motion sensor.
*If the lights stay on with sensor lens covered, contact customer
service.
Is the unit in the AUTO mode?
• Make sure the unit is not in one of the three Night Time On
modes.
7
How to set
power switch:
Turn power on and off twice
within 3 seconds
Turn power on and off twice
within 3 seconds
Turn the power "OFF"
for at least 90 sec., then
back "ON".