Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4.2 Rack-mount Installation
The switch may standalone, or may be mounted in a standard 19-inch equipment
rack. Rack mounting produces an orderly installation when you have a number of
related network devices. The switch is supplied with rack mounting brackets and
screws. These are used for rack mounting the unit.
Rack Mounting the Switch in the 19-inch rack:
1.
Disconnect all cables from the switch before continuing.
2.
Place the unit the right way up on a hard, flat surface with the front facing
toward you.
3.
Locate a mounting bracket over the mounting holes on one side of the unit.
4.
Insert the screws and fully tighten with a suitable screwdriver.
5.
Repeat the two previous steps for the other side of the unit.
6.
Insert the unit into the 19" rack and secure with suitable screws (not
provided).
7.
Reconnect all cables.
E-19
Publicidad
Tabla de contenido
