Management Guide; Console Port (Out-Of-Band) Connection - Longshine LCS-SW2402S Manual Del Usuario

5. Management Guide

This section instructs you how to enter and proceed the advanced management
capability, which can be accessed by RS-232 serial port (out-of-band) on the rear panel
or by Telnet session / Internet Browser over the network (in-band).
The management functions such as
Port Information/configuration/Statistic/Location Search/Duplex mode/Flow
·
Control
SNMP parameters
·
802.1Q/Port Group VLAN
·
Upgrade system firmware
·
Reboot system
·

5.1 Console Port (Out-of-band) connection

After attaching a RS-232 cable (Straight-through) to the serial port of a PC
running a terminal emulation program, press "Enter" key then login
screen appears. Enter your username and password to login the
management console.
Note
The management functions of console program are exactly the same with
web-based management interface but in text mode. For further operation, please
refer to 'Starting a Web Browser Session'.
Attention 1. The factory default value of UserName and Password is
"admin"
2. For detail console port configurations, please refer to
"Console Port" in chapter 3
3. System configurations via the Console Port only will be
allowed by the way of master device
E-23