Longshine LCS-SW2402S Manual Del Usuario página 42

To add member port
1. Click the "VLAN ID" combo box and select a VLAN you want new ports
to join in
2. Select ports (press Shift/Ctrl key for selecting multi ports) in the
"Non-Member" column
3. Click <<Add button to join selected ports in
To remove member port
1. Click the "VLAN ID" combo box and select a VLAN you want to remove
ports
2. Select ports (with Shift/Ctrl key to select multi ports) in the "Member"
column
3. Click Remove>> button to delete selected ports
Note
1. If a removed port is no longer belong to any other group, it is
temporarily disabled because no one can communicate with it
2. The port which is assigned a PVID and the PVID is equal to
VLAN ID, removing the port will not allow until you change it
VLAN Port Configuration
When the VLAN-enabled switch receives an untagged packet, the packet will
be sent to the port's default VLAN according to the PVID (port VLAN ID) of
the receiving port.
E-41