Playing A Record - GPO PICCADILLY Manual Del Usario

PLAYING A RECORD

1. Turn the FUNCTION KNOB (6) to the correct speed for your record
(33 ,45, or 78 RPM).
2. Place the record on the turntable, being careful to place the spindle
directly in the record hole.
We have included a 45-RPM ADAPTER (2) to use when playing 45-
RPM records. Just pull the adapter from its convenient storage space
next to the rear of the TONE ARM and place it over the spindle. Felt
protector pad also included.
3. Turn the VOLUME KNOB (8) to adjust the sound to the right level.
4. Unlock the TONEARM LOCK (5) by gently pushing the Lock to right
and the TONE ARM (3) will be ready for playing.
5. You can turn the PITCH KNOB (7) left or right to adjust the turntable
speed when the turntable is playing.
CAUTION: Always lock the TONE ARM (3) in place using the TONE
ARM LOCK&REST (5) when the player is not in use or the turntable is
being moved. Failure to do so can cause damage to the cartridge or
stylus.
5. Raise the TONE ARM (3) by slowly lifting the TONE ARM LEVER
(4).
6. Using your finger to move the TONE ARM (3) over the portion of the
record you want to hear. The record automatically begins spinning
once the TONE ARM (3) is over the record surface.
7. Lower the TONE ARM (3) using the TONE ARM LEVER (4) until the
STYLUS (10) touches the record and begins playing your music.
Make sure the TONE ARM LEVER (4) is completely down.
8. Adjust the Volume to the desired level by turning the VOLUME
KNOB (8).
12