GPO PICCADILLY Manual Del Usario página 16

INSTALLING A NEW STYLUS (NEEDLE)
NOTE: Do not directly touch the STYLUS (NEEDLE) (10) during
installation, or you may cause permanent damage to the STYLUS (10).
1. Hold the front tip of the Stylus Assembly with your thumb and index
fingers and insert the rear edge of the Stylus Assembly on the
CARTRIDGE as shown in Fig 5a.
2. While applying gentle pressure on the top of the TONE ARM (3) with
your index finger, carefully push the Stylus Assembly upwards until
you hear a click and the Stylus Assembly locks into place (Fig 6a).
3.The new STYLUS (10) is now ready to use.
A CORRECTLY POSITIONED STYLUS
• With normal use, a STYLUS (10) should last for about 50-60 hours of
record play. It is recommended the STYLUS (10) be replaced as soon
as you notice a deterioration of the sound quality.
• Use of a worn-out STYLUS (10) may damage records.
• Playing 78 RPM records will cause the STYLUS (10) to wear out
much faster than 33 or 45 RPM records.
16