Giordani perseo Instrucciones página 12

The locked side of the protector lies
against the child.
The protector is correctly attached
to the strap.
The straps run properly through the
protector.
WARNING! The textile cover and ac-
cessories are key components in the
design to ensure the child's safety.
The seat structure cannot be used
without the cover.
CLEANING & MAINTENANCE
It is important to use the original seat
cover, as it serves a notable purpose
for the seat. If it is lost or damaged,
replacements can be purchased from
our stores.
The seat covers are machine-wash-
able at a maximum temperature of
30º (delicate cycle). Washing at a high
temperature may cause the colour to
fade. Please wash the cover separate-
ly and do not machine dry.
Clean the plastic parts in warm water
using a mild detergent.
30
WARNING! Do not use chemical de-
tergents or bleaching agents.
WARNING! The integrated harness
system cannot be removed from
the restraint system.
Do not remove parts from the har-
ness system. The harness system
can be cleaned in warm water using a
mild detergent.
Ensure the child restraint sys-
te m p rov i d e s o p t i m a l p ro te c -
tion by following these points:
All the main components of the car
seat must be examined regularly. The
mechanical parts must work freely.
Ensure the child restraint system is not
blocked by the hard parts, e.g. the car
door, rails, etc., which could damage it.
Stop dirt or sand getting between
the upper section of the seat and
the base. This could have a negative
impact on rotation or tilting. If it hap-
pens, clean the dirt before rotating or
reclining the seat to prevent damage.
PRODUCT INFORMATION
If you have any doubts, speak to your
distributor/POS. Do provide the fol-
lowing details:
Series number (see label)
Vehicle brand and model and location
of the seat on which the product is to
be used.
Child's weight, age and height
For further information on our prod-
ucts, see our website.
PRODUCT DURABILITY
The car seat is designed to comply with
its specifications throughout its life cy-
cle, i.e. approximately 4 years. However,
as there may be unexpected tempera-
ture fluctuations or changes in the vehi-
cle, bear in mind the following:
- remove the restraint system from
the car or cover it with a light cloth if
the vehicle is likely to be exposed to
direct sunlight for any length of time.
- regularly check all the metallic and
plastic parts of the seat for damage,
deformity or faded colours. Throw
the car seat out if any changes are
found.Changes in the fabric (par-
ticularly fading) are perfectly normal
when used in a vehicle and have no
impact on normal seat functions.
PROdUCT RECYCLING
Protect the environment by separat-
22
ing out and eliminating waste from the
start (packaging) to the end (product
parts) of the life cycle of the child re-
straint system. Ensure your car seat is
disposed of in accordance with regula-
tions by speaking to the waste disposal
agency in your area or the local author-
ity. Make sure to respect the waste dis-
posal regulations in your country.
FOR TECHNICAL OR COMMERCIAL REA-
SONS, GIORDANI RESERVES THE RIGHT,
AT ANY TIME AND ALSO ONLY IN A SPE-
CIFIC COUNTRY, TO MODIFY THE TECH-
NICAL CHARACTERISTICS OF THE MOD-
ELS DESCRIBED IN THIS LEAFLET, AND/
OR THE SHAPE, TYPE AND NUMBER OF
THE ACCESSORIES SUPPLIED.
23