Conceptronic CMED3PLAY Guia De Inicio Rapido página 21

ENGLISH
14 transition modes; display interval changeable.
Zoom, rotation, move functions.
o Files can be sorted by name/size/time/type.
3. CAUTIONS
• Do not attempt to disassemble the included power adapter. This may cause high-voltage
injuries. If the adapter needs to be fixed, please contact the helpdesk of Conceptronic.
• Keep the device away from excessive moisture.
• Do not immerse or expose the device to liquids.
• Disconnect the power adapter if you do not intend to use the device for an extended
period of time.
• Avoid using the device in a location near combustibles.
• Change the batteries of the remote control with the same kind when they are weak or dead.
Dispose of the old batteries safely. Recycle them where possible. To avoid corrosion,
remove the batteries if the remote is not to be used for a long time.
• NEVER drop, shake or bump the device.
• To prevent overheating, do not cover the device.
• When entering or exiting standby mode, the POWER LED flashes. Please wait until it stops
before you proceed with other operations.
• The OTG cable is exclusively designed for the device. Do not attempt to use it on other
devices.
• Hard disk must be set as master. When the device is used as a player, make sure that all
partitions are primary (not extended); file system is FAT32 (NTFS is not supported). When
used as a USB storage device, extended partitions are supported, so is NTFS.
• Hard disk may be fragmented. This affects movies play back. It is recommended that you
assign a partition for files storage while another is for movies. Alternatively, you may
defragment the hard disk.
4. FUNCTIONALITIES OF THE GRAB 'N' GO MEDIA PLAYER
4.1 Identify the parts of the CMED3PLAY
• Main body
Remote Control Receiver
OTG ERR LED
Power LED
OTG LED
21
HDD LED
COPY Button