Conceptronic CMED3PLAY Guia De Inicio Rapido página 23

ENGLISH
5. HOW TO USE THE GRAB 'N' GO MEDIA PLAYER
5.1 OTG (On-The-Go) Mode
The HDD Video Player can be used as a USB host that allows you to transfer data on USB
slave devices (digital cameras, flash disk/MP3, memory card readers, etc) directly to the player
without using a PC.
Connecting with USB devices (illustrated with digital camera).
Instructions:
1 Plug the power adapter into a working electrical outlet and connect the other end of the
adapter to the device, switch the device on.
2 Connect the OTG cable to the device, the OTG LED on the front panel blinks once indicating
it is in OTG mode.
3 Connect the other end of the OTG cable to slave USB devices (i.e. Digital Camera); some
slave USB devices may need to be turned on manually. In general, the slave USB device
has an indicator to show that it is connected properly to the host (the device).
4 Press the COPY button to start file transmission. Files on the slave USB device are copied
to an auto-created folder (i.e. DSK00000) within the first partition of the device. While the file
transmission is in progress, HDD LED & OTG LED is blinking. The process is successfully
completed when HDD LED is off. When the ERR LED blinks red it means that the file
transmission failed or the slave USB device is not compliant with the device. If the ERR LED
turns green, the first partition may be low on disk space.
5 Disconnect the USB device and OTG cable after file transmission is complete.
If your camera does not need drivers when you connect it to your computer and can retrieve
images than it is almost certain you can use your camera together with our Conceptronic Grab
'n' Go media player. (Camera must support Real USB Specification what is USB1.1 or USB2.0
Mass storage Specification).
23