Publicidad
Step 13
Step
1
O2
D245
å
Pull the DRAWER FRONT BRACKETS (8G) apart and slide them
into the grooves in the DRAWER SIDES (D245 and D271). You may
need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
"LH" for easy identifi cation.
å
Fasten the DRAWER FRONT (O2) to the DRAWER FRONT
BRACKETS (8G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
3
Surface with
HIDDEN CAM
å
Fasten the DRAWER BRACE (M64) to the DRAWER
FRONT (O2). Tighten one HIDDEN CAM.
Page 18
Push down
8G
D271
Groove
BLACK 9/16" LARGE HEAD SCREW
(24 used in this step)
1
2
M64
O2
VIEW THE T-SLOT BOX VIDEO
2
D245
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D979 ) into the grooves
in the DRAWER SIDES (D245 and D271) and
DRAWER FRONT (O2).
4
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D245
å
Fasten the DRAWER BACK (D60) to the DRAWER
SIDES (D245 and D271) and DRAWER BRACE (M64).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Repeat this step for the other drawers. Use the LARGE
DRAWER FRONT BRACKETS (9G) for the large drawers.
420613
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
D979
U n fi
n i s h
e d
s u r
f a c
e
D271
O2
30S
(30 used in this step)
D60
M64
D271
www.sauder.com/services
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Publicidad
