Publicidad
●
E
10
●
B
●
F
●
K
●
G
FIG. 6
ENGLISH
HOW TO MAINTAIN
The instructions in this booklet serve as a guide to routine
maintenance. To keep the cleaner operating at top
efficiency empty the dust cup
●
K
filter
after each use (Fig. 6).
To Empty Dust Cup
NOTE: Turn off the power switch and unplug the
electrical cord to service.
Step 1: The telescoping handle
extended to remove the dust cup
Step 2: Push down on the top of the dust cup latch
●
G
Step 3: Pull dust cup
the nozzle.
Step 4: Grasp the edge of dust cup filter
to remove.
Step 5: Shake contents of dust cup
To Re-Install Dust Cup
Step 1: Replace dust cup filter
●
G
Step 2: Fit dust cup
and push firmly until latch clicks into place.
To Clean Dust Cup Filter
NOTE: Turn off the power switch and unplug the
electrical cord to service.
Clean the dust cup filter
Step 1: Separate dust cup
Step 2: Pull dust cup filter
Step 3: Shake and brush the dust and dirt from filter.
Step 4: If desired, launder the filter by hand in warm
water using a mild detergent.
Step 5: Air dry thoroughly before returning to use.
Step 6: Replace dust cup filter
●
G
Step 7: Fit dust cup
and push firmly until latch clicks into place.
Replace a dirty or torn filter. Order dust cup filter, part
number 60796. To place an order please contact Eureka
Customer Service, toll free at 1-800-282-2886, 8 a.m. to
7:30 p.m., (CST), Monday - Friday and 10 a.m. to 6:30 p.m.
Saturday or visit our web site, www.eureka.com.
●
G
and clean the dust cup
●
B
must be completely
●
G
.
●
E
from motor unit
and lift from
●
K
and pull out
●
G
into waste container.
●
K
.
●
E
and motor unit
back together
●
K
after each cleaner use.
●
●
G
from motor unit
●
●
K
G
out of dust cup
●
●
K
in dust cup
●
E
and motor unit
back together
●
F
.
E
.
.
G
.
Publicidad
