SOUNDMASTER highline UR2006 Manual De Instrucciones página 16

2.7 Set the DCF On/Off

Press <Mode> key once in the DCF On/Off setting mode.

The default display shows mark "On".

Press <Down> or <Up> key to switch on or off.

Press <Mode> once to confirm the current setting and it switches to auto-running mode.
2.8 Set up Cooking Timer

When device at the auto-run mode (turned off radio )

Press <Timer> once to enter the timer mode.

Press <Up> or <Down> to adjust the value (from 1 minute to 23hours and 59minute) or press
<Preset +> or <Preset -> to recall the preset value, press <Timer> to start the cooking timer.

When the timer is running press <Timer> to pause the timer. To restart the timer press <Timer>
again.

When the timer remain 30 seconds, the remind tone "be" will sound, (it also sound at 30s，25s,
20s, 16s, 12s, 9s, 6s, 4s, 2s & 1s) the time reach to 00.00, the voice "be...be...be...be...be" will
be heard. Press <Timer> to terminate the timer and leave.

Press and hold <Timer> for 2 seconds to terminate the timer and leave, when the timer is running.
As the alarm becomes active, the cooking timer, if exists, is terminated immediately.
2.9 Timer Value Preset

There are 10 preset Cooking timer

When device at the auto-run mode (turned off radio )

Press <Timer> once to enter the timer mode.

Press <Memory> once, the 'T' goes flash. Press <Preset +> or <Preset -> to select, press
<Memory> again to store the timer value.

Press <Up> or <Down> to adjust the value (from 1 minute to 23hours and 59minute).

Press the <Timer> to start the timer, press and hold <Timer> for 2 seconds to exit the timer mode.
ENGLISH
GB 4