Grounding Instructions - Pari PRONEB 37F81 Instrucciones De Uso

This product should be grounded when used. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electric current. This product
is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded.
DANGER
!
Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either
flat blade terminal. The wire with insulation having an outer surface that is green with or without
yellow stripes is the grounding wire.
Check with a qualified electrician or serviceman if the grounding instructions are not completely
understood, or if in doubt as to whether the product is properly grounded.
This product is for use on a nominal 120 V circuit, and has a grounding plug that looks like the
plug illustrated in sketch A. A temporary adapter, which looks like the adapter illustrated in
sketches B and C, may be used to connect this plug to a 2-pole receptacle (sketch B) if a properly
grounded outlet is not available. The temporary adapter should be used only until a qualified
electrician can install a properly grounded outlet (sketch A). The green colored rigid ear, lug, and
the like extending from the adapter must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
If it is necessary to use an extension cord, use only a 3-wire extension cord that has a three-blade
grounding plug, and a 3-slot receptacle that will accept the plug on the product. Replace or repair
a damaged cord.
GROUNDED
OUTLET
GROUNDING PIN
(A)

GROUNDING INSTRUCTIONS

GROUNDING METHODS
GROUNDED
OUTLET BOX
(B)
ENGLISH
ADAPTER
METAL
SCREW
TAB FOR
GROUNDING
SCREW
(C)
7