FALMEC KACL.939 Manual De Instrucciones página 10

ZEOLITE-CARBON FILTERS
In normal use conditions, we recommend regenerating the zeolite-car-
bon filter every 18 months and replacing it after 3 years. Simply place it
in a domestic oven at a temperature of 200°C for approximately 2 hours
to regenerate it.
Wait until the filter cools before reassembling it.
3
2
DISPOSAL AFTER END OF USEFUL LIFE
The crossed-out wheeled bin symbol on the appliance means that the
product is WEEE, i.e. "Waste electrical and electronic equipment'' , ac-
cordingly it must not be disposed of with unsorted waste (i.e. with
''mixed household waste''), but it must be disposed of separately so
that it can undergo specific operations for its re-use, or a specific treat-
ment, to remove and safely dispose of any substances that may be harmful to
the environment and remove the raw materials that can be recycled. Proper dis-
posal of these products contributes to saving valuable resources and avoid po-
tential negative effects on personal health and the environment, which may be
caused by inappropriate disposal of waste.
You are kindly asked to contact your local authorities for further information
1
regarding the designated waste collection points nearest to you. Penalties for
improper disposal of such waste can be applied in compliance with national
regulations.
INFORMATION ON DISPOSAL IN EUROPEAN UNION COUNTRIES
The EU WEEE Directive was implemented differently in each country, accord-
ingly, if you wish to dispose of this appliance we suggest contacting your local
authorities or dealer to find out what the correct method of disposal is.
INFORMATION ON DISPOSAL IN NON-EUROPEAN UNION COUNTRIES
The crossed-out wheeled bin symbol is only valid in the European Union: if you
wish to dispose of this appliance in other countries, we suggest contacting your
local authorities or dealer to find out what the correct method of disposal is.
WARNING!
The Manufacturer reserves the right to make changes to the equipment at any
time and without prior notice. Printing, translation and reproduction, even par-
tial, of this manual are bound by the Manufacturer's authorisation.
Technical information, graphic representations and specifications in this manual
are for information purposes and cannot be divulged.
This manual is written in Italian. The Manufacturer is not responsible for any tran-
scription or translation errors.
10