The battery life depends on how often the cook control
is used.
The battery contains Dimethoxyethane n° CAS 110-71-
4. It is in accordance with the European regulations. For
your safety and the environmental protection: do not
open the battery, do not expose it to high
temperatures, do not throw it with household waste;
bring back it in a center of used battery collection.
To remove the battery from your cook control, open the
battery lid with a coin (see illustration opposite).
Replace your battery.
Replace the gasket in its casing.
Position the "half moon"
the "half moon"
Gently turn the battery cap and continue to press
lightly as you align the "half moon"
cap with the moon
Work on a flat work surface so that the cap is
positioned correctly horizontally.
Do not force the battery cap when you close it. Do not
turn beyond the stops.
In the case of loss, you can purchase another cook
control from all of our TEFAL Approved Service Centres.
Before cooking
Before each use, remove the operating valve (A)
steam release valve (B) is not blocked
Check that the safety valve is mobile (see sections "Cleaning" and
"Compulsory checks before each use")
Close your pressure cooker
In case of difficulties closing the product rinse the seal under water and
replace it in the lid without drying it
it under each of the grooves on the lid.
Position the operating valve (A)
30
on the battery cap opposite
on the cook control.
●
on the cook control.
- Fig.
3.
- fig
on the battery
- Fig. 11
- Fig.
13.
- Fig.
18.
- fig 19
and
15
and take care to insert
8.
+
and check the
* depending on model