Use
Pressure cooking
Opening
Switch the lid handle from a horizontal position to a vertical position
The lid turns.
Lift the lid.
In case of difficulties opening the product rinse the seal under water and
replace it in the lid without drying it
it under each of the grooves on the lid.
Closing
Ensure that the lid handle is in a vertical position.
Place the lid on the pan as indicated in
with the pan handles.
Switch the lid handle back from a vertical position to a horizontal position
Fig.
3.
It is normal that the lid turns on the pan.
If you are unable to close the lid:
Check the correct positioning of the gasket.
In case of difficulties closing the product rinse the seal under water and
replace it in the lid without drying it
it under each of the grooves on the lid.
Using for the first time
For models with a non-stick coating: wash and use cooking oil to lightly oil
the entire interior surface.
Put the tripod* (K) in the pan base.
Fill the pan (N) with water up to the 2/3 mark (MAX 2)
Position the steam basket* (J) on the tripod* (K).
Close your pressure cooker.
Align the pictogram
positioning mark (C)
Place your pressure cooker on a heat source then set to maximum power.
26
Stewing
- fig 19
- fig 19
for the operating valve (A) with the valve
- Fig.
9.
15
and
and take care to insert
- Fig. 1
by lining up the plastic part
and
15
and take care to insert
- Fig.
Release
- Fig.
2.
-
5.
* depending on model