To clean the lid:
Wash the lid using a sponge and washing-up liquid.
To clean the gasket:
After each use, clean the gasket (I) and its housing.
To reposition the gasket, refer to
properly inserted beneath each of the grooves on the lid.
To clean the operating valve (A):
Remove the operating valve (A)
Clean the operating valve (A) under cold tap water
- Fig.
16.
Check its mobility: see figure opposite.
To clean the steam release outlet (B) located on the lid:
Remove the valve (A)
Check to make sure the steam release outlet is unblocked and round
13. If needed, clean it with a tooth pick
To clean the safety valve (E):
Clean the part of the safety valve located inside the lid by washing under
water.
Check its proper functioning by pressing firmly using a cotton swab (you will
remove the cotton) on the ball, which must be mobile
"Compulsory checks before each use".
To clean the cook control* (F):
Use a clean dry cloth.
Do not use any solvents.
Never place the cook control in water, nor in the dishwasher.
36
- Fig. 15
- Fig. 11
- Fig. 11
and ensure that the gasket is
- Fig. 17
and rinse it.
- Fig
- Fig.
18. See section
* depending on model