Setting Date And Time - Veridian Healthcare 01-506 Manual De Instrucciones

setting the date and time
IT IS NECESSARY TO SET THE DATE AND TIME FOR THE MONITOR EVERY TIME
BATTERIES ARE INITIALLY INSTALLED OR REPLACED.
1. When the unit is off, press and release both the
(MEMORY) button at the same time. The month will begin to flash, Fig. 1.
2. Press the M (MEMORY) button to change until the desired number
appears. To scroll through the numbers quicker, hold down the M
(MEMORY) button as the numbers advance.
3. Press the POWER button to confirm the month entry.
4. Next, the date will blink. Repeat steps 2 and 3 to set the date, then
hours, then minutes.
5. After setting the minutes, the unit will automatically exit out of the
date/time setting mode.
When the monitor is off, the date and time will still appear at the top of the
screen.
The time is displayed in 24hr Military Time. This chart explains the time
conversion.
1:00 = 1am
2:00 = 2am
3:00 = 3am
4:00 = 4am
5:00 = 5am
6:00 = 6am
10
– English
military time = regular time
7:00 = 7am
8:00 = 8am
9:00 = 9am
10:00 = 10am
11:00 = 11am
12:00 = 12pm
POWER and M
13:00 = 1pm
14:00 = 2pm
15:00 = 3pm
16:00 = 4pm
17:00 = 5pm
18:00 = 6pm
Fig. 1
19:00 = 7pm
20:00 = 8pm
21:00 = 9pm
22:00 = 10pm
23:00 = 11pm
24:00 = 12am