Amate Audio X210 Manual De Usuario página 13

X210/X215W/X218W3K/X21T
 Mute: (Orange) The system is muted (amplifiers are disabled). The system
can be muted from the PC remote control or from the keypad.
IMPORTANT: When the amplifier is in MUTE, the PROTECT LED will be also lit to
show that the amplifier is disabled. Also when the system is waking up from the
STANDBY mode, the PROTECT led will be lit for a few seconds. Under these
circumstances the PROTECT LED is reporting that the amplifier is disabled, but not a
fault condition.
A
F
Fig.9. X210A control and connection panel
D) SIGNAL INPUT LEDS: Monitor the signal arriving at the module input.
 Input: Signal is present at the input. Nominal input level is +8dBu (2Vrms).
 >8V Overload: The input signal exceeds +14dBu (4Vrms), so it will be
compressed. Avoid the continuous lighting of this led in order to preserve the
dynamic range of the audio signal.
E) OUTPUT LEDS: Show the amplifier output level, both for Low and High channels.
13
B
G H
C D E
I
Oct 2017
J
Amate Audio