Amate Audio X210 Manual De Usuario página 21

X210/X215W/X218W3K/X21T
I) AC MAINS INPUT/LINK: Mains supply connection via PowerCon.
 Blue connector for AC in.
 Grey connector to feed other units in parallel. Linking up to 2 units is possible,
provided that a quality cable of a minimum section of 3x2,5 mm
Connecting more than 2 units in parallel may lead to a voltage drop in the cable
that will reduce the equipment performance.
4. X218W3K FEATURES
The X218W3K cabinet is ideal for bass reinforcement. It includes 3000W
amplification for the woofers and digital signal control by DSP. The manufacturer
presets (LPF90, LPF90+3, LPF100, LPF100+3, LPF110, LPF110+3, LPF80,
LPF80+3, CARD90, CARD100, CARD110) make it easy, flexible and user-friendly.
The 18" neodymium woofers used, thanks to their exclusive magnetic design,
combine excellent bass frequency response, high performance and low distortion.
These features are mainly due to the presence of demodulation rings which
drastically reduce the inter-modulation and third order distortion and considerably
improve the transitory response. There is excellent heat dissipation due to the
external positioning of the magnet set. Without any doubt one of the finest bass
transducers currently available. The result is a clean, high quality sound. The upper
surface incorporates a M10 socket for a stacking frame (FR-X210, FR-X208).
4.1. Technical description
The X218W3K cabinet comes with DSP control, with acoustic bass-reflex cabinet. As
a bass reinforcement system, its usable bandwidth is 28Hz-120Hz (-10dB). It has
3000W continuous amplification, thermal protection, anti-short circuit protection at
the output, maximum power limiter, and protection against overvoltage. The DSP
includes some presets which can be selected either accessing the cabinet's rear
control panel or via the computer with Ethernet connection. The LPF90 preset
means low pass filter at 90Hz; LPF90+3 means low pass filter at 90Hz with +3dB
boost at 44Hz; ; LPF100 means low pass filter at 100Hz, LPF100+3 means low pass
filter at 100Hz with +3dB boost at 44Hz; LPF110 means low pass filter at 110Hz,
LPF110+3 means low pass filter at 110Hz with +3dB boost at 44Hz, LPF80 preset
means low pass filter at 80Hz; LPF80+3 means low pass filter at 80Hz with +3dB
boost at 44Hz and CARD90/100/110 means cardioid polar pattern when used in
combination with two other X218W3K subwoofers. The X218W3K is connected
using the XLR balanced connectors. Mains supply is through PowerCon.
It is built in birch plywood, which has a high resistance to vibrations and humidity.
High resistance weatherproof bi-component Polyurea coating. The front face is
protected by two 1.5 mm thick steel grille with acoustically transparent grey cloth.
4.2. Presets
The X218W3K includes some manufacturer presets for different types of application.
The DSP system can also store up to 23 customer's presets, depending on user
requirements.
21
Oct 2017
2
is used.
Amate Audio