Amate Audio X210 Manual De Usuario página 9

X210/X215W/X218W3K/X21T
X21T Subwoofer
- Self-powered subwoofer.
- 2500W amplifier.
- 24-bit AD/DA converters with 112dB dynamic range, 96kHz sampling rate.
- DSP Controls (parametrics, delay, volume and limiters).
- Self amplifier diagnostics: output power, temperature, clipping.
- Ethernet connectivity.
- Overvoltage protection (>250V-400V).
- 21" neodymium woofer with 5.3" voice coil.
- Birch plywood construction.
- Black textured Polyurea paint finish: totally ecological.
- Frontal steel grilles with acoustically transparent grey cloth.
2. X210A/P. FEATURES
The X210A cabinet includes 2400W bi-amplification for the low-mid range woofers,
600W for the high range compression drivers and digital signal control by DSP. The
manufacturer presets LF_XTEND, COMPACT, NEARFIELD and LONGTHROW
make it easy, flexible and user-friendly.
The basic set is composed of one unit X210P (passive) and one unit of X210A
(active). This last model includes all the necessary electronics to feed the X210P
unit.
The result is a clean, high quality sound at full power in large sites.
2.1. Technical description
The X210A cabinet comes with DSP control, full range sound delivery thanks to its
direct radiation transducers and acoustic bass reflex cabinet. As a full range system,
its usable bandwidth is 70Hz-18kHz (-10dB).
It has 3000W continuous amplification (2400W + 600W), thermal protection, short
circuit protection at the output, maximum power limiters on each channel, and
protection against mains overvoltage. The DSP includes some presets which can be
selected either accessing the cabinet's rear control panel or via the computer with
Ethernet connection. The LF_XTEND preset gives a maximum flat response for full
range applications (without subwoofer); COMPACT preset gives a maximum flat
response for a standard configuration of four X210 and one/two subwoofers
(X215W/X21T/X218W3K) and it can be also used for an 8-box configuration (central
cabinets); NEARFIELD preset has -3dB in high range for the lowest cabinets in a line
array; LONGTHROW preset has +3dB in high range for the highest cabinets in a
long-throw configuration (8 box); STACK-2 preset gives a maximum flat response for
a standard configuration of two stacked X210 on one X215W/X21T/X218W3K.
The X210A cabinets are connected using the XLR balanced connector. Mains supply
is through PowerCon at 230V.
9
Oct 2017
Amate Audio