Amate Audio X210 Manual De Usuario página 27

X210/X215W/X218W3K/X21T
 Grey connector to feed other units in parallel. Linking up to 2 units is possible,
provided that a quality cable of a minimum section of 3x2,5 mm
Connecting more than 2 units in parallel may lead to a voltage drop in the cable
that will reduce the equipment performance.
5. X21T FEATURES
The X21T cabinet is ideal for bass reinforcement. It includes 2500W amplification for
the woofer and digital signal control by DSP. The manufacturer presets (LPF80,
LPF80+3, LPF90, LPF90+3, LPF100, LPF100+3, LPF110, LPF110+3, LPF120,
LPF120+3, CARD80/90/100/110/120) make it easy, flexible and user-friendly.
The 21" neodymium woofer used, thanks to its exclusive magnetic design, combines
excellent bass frequency response, high performance and low distortion. There is
excellent heat dissipation due to the external positioning of the magnet set. Without
any doubt one of the finest bass transducers currently available. The result is a
clean, high quality sound.
The upper surface incorporates a M10 socket for a stacking frame (FR-X210, FR-
X208).
5.1. Technical description
The X21T cabinet comes with DSP control, with acoustic bandpass cabinet. As a
bass reinforcement system, its frequency response is 28Hz-120Hz (-10dB).
It has 2500W continuous amplification, thermal protection, output short circuit
protection, maximum power limiters for each channel, and protection against
overvoltage. The DSP includes several presets which can be selected either
accessing the cabinet's rear control panel or via the computer with Ethernet
connection. The LPF80 preset means low pass filter at 80Hz; LPF80+3 means low
pass filter at 80Hz and +3dB boost at 40Hz; LPF90 means low pass filter at 90Hz;
LPF90+3 means low pass filter at 90Hz and +3dB boost at 40Hz; LPF100 means low
pass filter at 100Hz; LPF100+3 means low pass filter at 100Hz and +3dB boost at
40Hz; LPF110 means low pass filter at 110Hz; LPF110+3 means low pass filter at
110Hz and +3dB boost at 40Hz; LPF120 means low pass filter at 120Hz; LPF120+3
means low pass
CARD80/90/100/110/120 means cardioid polar pattern when used in combination
with two other X21T subwoofers.
By increasing the low pass filter a greater 'punch' sensation can be achieved, but
clarity is lost. It is down to the user to decide on the most suitable preset.
The X21T is connected using the XLR balanced connectors. Mains supply is through
PowerCon.
It is built in birch plywood, which has a high resistance to vibrations and humidity
with black Polyurea paint coating. The front face is protected by two 1.5 mm thick
steel grille with acoustically transparent grey cloth. The X21T includes four in-built
lateral handles for an easy and comfortable transport.
27
filter at 120Hz and +3dB boost
Oct 2017
2
is used.
at 40Hz and
Amate Audio