Transport; Information On Demolition - NIBBI FC20 Uso Y Mantenimiento

engine (i.e. cylinder head, exhaust, etc.) clean
to avoid a build up of debris that will overheat
the engine.
42) Whenever possible, stop the machine on
level ground.
43) When stopping on unlevelled ground,
engage 1st gear (up hill) or reverse gear
(down hill).
44) If leaving the machine for a long time,
ensure it is inaccessible to children and
inexperienced people. Close the fuel tap (if
fitted).
45) Do not leave the machine with the engine
running.
46) The maintenance instructions of the
machine must always be carefully followed
and worn parts replaced when necessary.
47) If the machine is to remain unused for
some time, clean it accurately and insert the
appropriate protections.
48) Apart from the previous items, it is
necessary to take heed of the specific safety
norms in force in the Country where the
machine is operating.
49) All the assembly, disassembly and
adjustment operations must be performed
with the motor off.

TRANSPORT

Always insert
protection (if in mower version).
When loading the machine onto a lorry, use
ramps of adequate stability and strength, or
otherwise secure the machine on a pallet
and lift with an elevating trolley with the forks
at the maximum possible opening.

INFORMATION ON DEMOLITION

At the end of its working life the machine
must be demolished. This can only be
done by authorised bodies, in the respect
of the national environmental laws in force.
Therefore, contact the local competent
authorities on the procedure to follow. The
main parts of the machine should be ferrous
materials, natural rubber, epoxy paints,
electrical and electronic components.
34
the appropriate blade