Tivoli Audio PAL BT Manual De Usuario página 5

Guide to Features (Front)
1.
2.
3.
1. TUNING DIAL: Turn the analog dial to the right or to the left to change the FM and AM
frequency range. The 5:1 tuning gear ratio provides easy, accurate tuning.
2. POWER INDICATOR: Indicates when the unit is on as well as the charging mode and battery
status. See the section marked "About the battery pack".
3. SOURCE KNOB: Turn the knob 1 click up to select the FM band or 2 clicks up to select the
AM band. To activate Bluetooth, switch to BT and follow the steps outlined in the "Bluetooth
Operation" section.
4. VOLUME: Turn.the.volume.knob.up.to.increase.the.volume.or.down.to.decrease.the.volume.
of.the.PAL.BT's.speaker..Since.the.PAL.BT.is.portable,.please.be.considerate.of.others.around.
you.when.increasing.the.volume.level..This.knob.will.also.control.the.level.of.headphones.(not.
included).when.connected.
6.–.ENGLISH
4.
Guide to Features (Rear)
1.
2.
3.
4.
5.
1. FM ANTENNA: When listening to FM, adjust this telescoping antenna and position it for best
reception. In strong FM signal locations, reducing the antenna's length may provide better
reception. When the unit is not in use or when listening to AM, keep the antenna retracted to
protect it. This antenna has no affect on AM reception. For AM, rotate the PAL BT itself to align
the internal antenna for improved reception.
2. PAIRING: When connecting a new device to the PAL BT, press and hold this button to enter
pairing mode.
3. AUXILIARY INPUT: To hear audio from another device (such as a portable CD or MP3 player)
through the PAL BT's main speaker, connect the device's audio output to this input and set the
source switch to AM. This jack accepts a 1/8" stereo male mini plug. Note that you may need
to adjust the volume level differently for an auxiliary device than the level normally used for radio
listening. Keep the rubber plug inserted when this input is not in use.
4. HEADPHONE OUTPUT: Connect a headset to this stereo output for private listening. The
headphone volume will be controlled by the PAL BT's volume knob. Connecting a pair of
headphones will mute the PAL BT's main speaker. This jack accepts a 1/8" stereo male mini
plug. You may also record from the PAL BT or use it as a high quality stereo tuner by using this
output. Keep the rubber plug inserted when this output is not in use.
5. BATTERY COMPARTMENT: Stores the Lithium-ion battery battery pack. Do not load any other
type of batteries in the compartment. See "Replacing the battery pack."
6. DC INPUT: Use this input to operate the PAL BT using its included PAL BT Tivoli Audio 9V 2A
power supply. Use only the power supply provided with this product. Should the power
supply get damaged or misplaced, contact Tivoli Audio for a replacement. Keep the rubber
plug inserted when this input is not in use.
Note: We suggest keeping the rubber covers in place over the rear jacks to protect them when not in use.
6.
7.–.ENGLISH