Bluetooth Operation; Low Battery - Tivoli Audio PAL BT Manual De Usuario

Bluetooth Operation

Prior.to.pairing,.verify.your.device.is.not.connected.to.any.other.Bluetooth.product..Devices.may.
pair.differently..Below.is.a.general.guide.
1. Turn the PAL BT to the "BT" position, then press the Pairing button. Turn the volume up about
¼ to start. Also turn up the volume on the source device (the device you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3.
Select "Tivoli Bluetooth (Not Paired)" when it appears on your device's screen to initiate search-
ing. Some devices may prompt you for a PIN. If so, enter "0000". "Tivoli Bluetooth" will change
from "Not Paired" to "Connected".
4. When your device confirms pairing, you can begin playing your music files wirelessly. Adjust the
volume level on your device. You should not have to pair your device again.Depending on your
device, you may need to make multiple attempts at Pairing and/or Connecting to the PAL BT,
but please give your device adequate time to Pair or Connect before repeating the process.
8.–.ENGLISH
About The Battery Pack
The.PAL.BT.uses.a.sealed.pack.of.Lithium.Ion.cells..The.front.panel.green.LED.serves.both.as.a.
power.indicator.and.battery.power.and.charge.status.indicator..Use.only.an.authorized.Tivoli.Audio.
PAL.Series.Lithium-Ion.battery..The.estimated.battery.life.on.a.full.charge.is.12.hours.

Low Battery

With the PAL BT turned On but not plugged in, as the batteries become discharged, the green power
indicator LED to blink with a short off/long on cycle, indicating the batteries are in need of being re-
charged. The remaining playback time from the moment the blinking begins until the PAL BT shuts off
is estimated between 20 minutes and several hours. It is difficult to be more precise due to many fac-
tors including how long and how loud the radio is played, and the remaining charge left in the batter-
ies. For instance, the PAL BT will likely play longer off of the batteries at a low volume than at higher
volume levels. As you use your PAL BT, you will develop a better idea of how much playback time
you have before recharging is necessary. You may also notice reduced battery playback time with
PAL BT when using Bluetooth Wire¬less Technology. Using the Bluetooth wireless technology when
on battery-only power will reduce the average playback time experienced with just radio listening.
If the PAL BT is turned on to FM or AM and the power indicator is off, then the batteries require
recharging. However, it is normal for the radio to play for a brief period if turned on after the LED
has gone out.
If the PAL BT is to be used away from an AC or other power source for an extended period of time, it
is wise to "top-off" the charge before use, especially if the LED is blinking.
Leaving the PAL BT plugged in, even when not in use, ensures the batteries will be charged when
you need them. If the PAL BT is not plugged in, the batteries will self-discharge as a safety measure.
There is no harm in continuously operating the PAL BT with the power supply.
Note: It may take up to 4 charge/discharge cycles before the batteries are operating at full
capacity when new or left unused for several weeks.
9.–.ENGLISH