This power head is intended to be used
only with a 5 U.S. gallon (19 Liter) plastic
bucket, approximately 14-1/2 inches tall
with a top diameter of 11-3/4 inches with a
10 gauge steel wire, bale-type handle.
TO REDUCE THE RISK OF ELECTRIC
SHOCK, ONLY USE BUCKETS WITH
THE FOLLOWING UPCs:
0 51596 10055 1,
Company® - 0 12891 95001 2, 0 64784
73118 5, Menards® - 0 17581 30505 9,
ACE® - 0 82901 08836 3,
2 01102 14080 3,
6 28076 19101 1,
Hardware® - 0 26703 05500 0.
oN/oFF SWITCH
Familiarize yourself with the control and
features of your vacuum cleaner. Turn the
unit "ON" by pushing the switch from
position "O" to position "I". The symbols
used on the switch are international
symbols. The "O" is the "OFF" position and
the "I" is the "ON" position.
Filter Use:
With this bucket you have a Vac that is
intended for household use.
This vacuum includes a paper filter for fine
dust pick up.
The paper filter should always be removed
for wet pick ups.
When vacuuming liquids the unit has a
float that will rise to the top and shut off
suction when the bucket is full. This will
increase the motor's RPM's. Turn off the
Vac and dump out liquids to continue
using the unit.
Important: To avoid damage to the unit do
not let the motor run with a full bucket.
oPERATIoN
Lowe's® -
Tractor Supply
CANAC®
Canadian Tire® -
Orchard Supply
bLoWING FEATURES
This
WORKSHOP Wet/Dry
Cleaner also functions as an air blower.
It has the capability to blow sawdust and
other debris. It is excellent to use to blow
dust and debris out of garages or off patios
and driveways.
To Use Your WoRKSHoP Wet/Dry Vac
Power Head As A blower:
Locate the blowing port of your Vac.
Insert one end of the hose into the blowing
port.
Turn Vac "ON" and you are ready to use
your Vac as a blower.
WARNING:
bystanders, keep them clear of
blowing debris. The operation of any
utility Vac can result in foreign
objects being blown into the eyes,
which can result in severe eye
damage. Always wear safety goggles.
7
Float In Raised
Position
Vacuum
To avoid injury to