Festo SLG-Z Serie Instrucciones De Utilizacion página 19

SLG-Z-...
3 Conditions of use
Please note
Incorrect handling can lead to malfunctioning.
S Make sure that the requirements in this chapter are always observed.
The product will then function correctly and safely.
Compare the maximum values in these operating instructions with your actual
S
application (e.g. pressures, impact forces, impact energy, torques, tempera-
tures).
The product can only be operated in accordance with the relevant safety guide-
lines if the maximum loading limits are observed.
Make sure there is a supply of correctly
S
prepared compressed air.
Please observe the regulations applicable
S
to the place of use and comply with
national and local regulations.
Remove the packing with the exception of
S
the adhesive labels on the compressed air
connections (to prevent dirt from enter-
ing).
The packaging is intended for recycling
(except for oiled paper which must be
disposed of ).
Take into account the prevailing ambient
S
conditions.
Please operate the SLG-Z-... in a clean
S
environment.
If dirt is not removed, the lever may only
swivel with difficulty.
Slowly pressurize the complete system.
S
To do this use safety start-up valve type
HEL-... .
Use the product in its original state. Un-
S
authorized modification is not permitted.
Festo SLG-Z-... 0205NH English
LF-... LR-...
Fig. 4
[°C] [%] [mbar]
Fig. 5
Fig. 6
19