Changing Battery - Ezviz T10 Manual Del Usuario

Changing Battery

The battery model is CR123A and it can work for up to 24 months.
When the battery runs out, T10 sends a low battery signal to the connected Internet Alarm Hub
to remind you to change the battery.
1. Loosen the three lock screws on the bottom of T10 with a screw driver and take off
the battery cover.
2. Change the battery.
Do not oppositely place the positive and negative poles of the battery.
3. Replace the battery cover and tighten the three lock screws back in place.
Loosen the three lock screws.
1
Do not move the black waterproof rubber ring inside the battery cover.
Change the battery.
2
5