Changing Battery - Ezviz T1 Manual Del Usuario

Maintenance

Changing Battery

When the detector's battery is low, the detector will send a low battery warning to the
EZVIZ app to remind you to change the battery.
Take the detector off from the base.
1
Open the detector's battery cover and then change the battery.
2
Install the detector back to the base.
3
Disassembling the T1
Open the detector's battery cover and loosen the
1
screws on the two sides of the battery slot, as
shown in the left figure.
2 Separate the front cover and the rear cover.
22
Screws