Do not use the cord for any purpose for
■
which it was not intended, e.g. to carry the
device or to pull the plug out of the 12 V
socket. Keep the cord away from heat, oil,
sharp edges or moving parts of the device.
Damaged or tangled cords or plugs
increase the risk of electric shock.
Damage to the device, power cord or plug
■
presents a risk of loss of life from electric
shock. Check the condition of the device,
power cord and plug, frequently.
Do not use a device with damaged parts.
■
If a dangerous situation arises, pull out the
plug from the socket immediately.
When not in use, always ensure that
■
electrical devices are kept out of reach of
children. Do not let anyone use the device
if he or she is not familiar with it or has not
read the instructions and advice. Electrical
devices are dangerous when they are used
by inexperienced people.
Never open up the device. Always have all
■
repairs carried out or replacement parts
fitted at the service center or by an elec-
trical equipment repair specialist.
■
4
│
US-EN
Operation
Before first use
Take all the parts carefully out of the pack-
♦
aging and remove all the packaging
material. Dispose of all the packaging
material in an environmentally friendly
manner.
Fully unwind the cord attached to the 12 V
♦
plug
.
Always make sure that the dust filter
►
installed before using the device.
Fitting and removing attachments
Extension hose
Insert the smaller end of the extension
♦
hose
snugly into the front nozzle
Insert the desired attachment
♦
into the extension hose
Small brush
:
This accessory has hard bristles and is suitable
for initially loosening and then vacuuming
up stubborn dirt, e.g. from the upholstery or
footwell.
Insert the small brush
♦
front nozzle
.
Crevice tool
:
Use this attachment to get into narrow, hard
to reach places.
Insert the crevice tool
♦
front nozzle
.
Removing attachments:
Simply pull the attachment off the front
♦
nozzle
or the extension hose
:
,
snugly
.
snugly into the
snugly into the
.
SHS 12.0 B2
is
.