Turning On / Off; Servicing And Cleaning; Disposal; Disposal Of The Device - Silvercrest SHS 12.0 B2 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Turning On / Off
Insert the 12 V plug
socket / cigarette lighter socket of the
vehicle.
To turn the device on, slide the ON / OFF
switch
forward into the I position.
To turn the device off, slide the ON / OFF
switch
back into the 0 position.
Pull the 12 V plug
after use.
Extended use will drain the battery power.
Do not run the vehicle's engine while
cleaning. This can shorten the life of the
device.

Servicing and cleaning

The device requires no maintenance.
Before you clean the device itself, pull the
12 V plug
out of the 12 V socket, other-
wise there is a risk of electric shock.
Clean the housing with a soft, dry cloth.
Never use liquids or cleaning agents, as
they may damage the device.
For the best possible performance, you
should empty the dust container
diately after use and/or when the suction
power drops.
Press the unlock button
dust container
Take out the dust filter
to clean the dust filter better if you detach it
from the end seal. To do this, hold the end
seal firmly and twist the filter off carefully
counter-clockwise (bayonet fitting). Rinse
out the dust filter
water and allow both parts (filter and end
seal) to dry completely. Attach the filter
back onto the end seal.
SHS 12.0 B2
into the 12 V
out of the 12 V socket
imme-
and take the
out of the housing
. You will be able
thoroughly in cold
Empty the dust container
Carefully replace the dust filter
into the dust container
vacuum cleaner without the dust filter
place.
Attach the dust container
onto the housing
parts engage.
The front nozzle
structed at all times. Blockages can lead to
overheating and damage to the motor.

Disposal

Disposal of the device

Electrical devices may not be thrown away
as part of normal household trash. If you can
no longer use your electrical device, dispose
of it in accordance with the legal provisions
applicable in your state. This ensures that old
electrical devices are recycled and environ-
mental pollution is kept to a minimum. Additio-
nal information about disposal is available on
the Internet at www.epa.gov.

Disposal of packaging materials

The packaging protects the device from dama-
ge during transport. The packaging materials
have been selected for their environmental
friendliness and ease of disposal, and are
therefore recyclable.
Returning the packaging to the
materials cycle conserves raw
.
materials and reduces the amount
of waste that is generated.
Dispose of packaging materials that are no
longer needed in accordance with applicable
local regulations.
If possible, keep the original packaging of
the device during the warranty period so
that the device can be packaged properly
for return shipment in the event of a war-
ranty claim.
completely.
back
. Never use the
carefully back
and ensure the two
must be free and unob-
 5
US-EN
in

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido