Preparations For Installation; Standard Fittings - Gree GMV-ND56PHS/A-T El Manual Del Propietario

Note!
① √: included, X: not included
② Please refer to the user manual of Wired Controller or Remote Controller for function
details

3 Preparations for Installation

Note: Product graphics are only for reference. Please refer to actual products. Unspecified
measure unit is mm/inch.

3.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No.
1 Wired Controller
M4X25 Screw
2 (Cross recessed small
pan head screw)
3 Drain Hose Assembly
4 Special Nut
5 M10X8 Nut with Washer
6 M10 Nut (M10X8.4 Nut)
M10 Washer (Spring
7
Washer M10X2.6)
8 Insulation
9 Insulation
10 Fastener
11 Hanger
12 Nut with Washer
paper pattern for
13
installation
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Duct Type Indoor Unit
Name Appearance Q'ty
1 To control the indoor unit
3 To fix the wired controller
To connect with the hard PVC
1
drain pipe
To be used for connecting the
1
refrigerant pipe
To be used together with the
4
hanger bolt for installing the unit.
To be used together with the
4
hanger bolt for installing the unit.
To be used together with the
4
hanger bolt for installing the unit.
1 To insulate the gas pipe
1 To insulate the liquid pipe
8 To fasten the sponge
or
4 To fix the indoor unit
To fix the hook on the cabinet of
8
the unit.
1 Locate the drill hole on ceiling
4
Usage