Charging Your Device; Battery Charge Status; Saving Battery Power - JP ClassMate PC SLIDES201t Manuel Del Usuario

6. CHARGING YOUR DEVICE

If you are charging the device for the first time, it will take around 4 to 5 hours to be
fully charged.
Note:
Plugging the adapter with a remaining battery capacity above 90% might prevent
the equipment from reaching its full charge.
• Connecting the charger improperly may cause damage to the device. Damages
caused by misuse are not covered by the warranty.
• The device can be used while it is charging, but the charging process may take longer.
• It is normal for the device to become warm during charging for long periods of use.
• Do not leave your device connected to the power supply once it is fully charged.
• Once it is fully charged, unplug the charger from the device, and then unplug it from
the electric supply. Use only products produced by jp.ik, like chargers, batteries, and
cables. Unapproved chargers or cables can damage the device or the battery.
Warning: Only use the bundled power adapter. Unplug your device from
the power supply once it is fully charged. Our devices are not designed to
be left connected to the power supply for long periods of time.

6.1. Battery charge status

To check the battery status on the Desktop, move the cursor on the battery icon
from the taskbar. A pop-up box appears, showing the remaining battery status.
BACK TO INDEX
To charge your device:
1. Plug the USB head of the cable into the adapter;
2. Plug the micro-USB head of the cable -
with the side marked with "B" or an icon
facing down - into the micro-USB port on
your tablet;
3. Plug the adapter into a wall-socket.
The following icons represent the battery status of our devices:
Battery is fully charged.
Battery is starting to drain.
Battery will completely drain and needs charging. The battery led indicator
is blinking red.
Battery is charging.

6.2. Saving battery power

Our devices provide options that help you save battery power.
A battery is an expendable supply. Thus, when used over a long period, its capaci-
ty is shortened. If the battery of your device is reduced to under a half of its initial
time, we recommend the purchase of a new battery.
When you don't use the battery for a long time, you must store it after charging
(we recommend you to charge it at least until 30% or 40% of its capacity). This will
extend the battery life time of your device.
By customizing some options, you can use the device during longer periods of time
between charges:
• Close unnecessary applications;
• Deactivate the Bluetooth if not needed;
• Deactivate the Wi-Fi option if you are not using internet;
• Deactivate auto-syncing of applications;
• Decrease the backlight time;
• Decrease the brightness of your display.
10