Bosch 1 687 011 537 Manual Original página 17

6. Mount the condensate vessel. Insert the condensate
vessel into the maintenance unit housing from below
so that one of the marks (see Fig. 3, item 1 or 2)
lines up with the indentation (see Fig. 3, item 3) in
the housing of the maintenance unit. Then turn the
condensate vessel until the lock (see Fig. 3, item 2)
engages at the indentation (see Fig. 3, item 3).
7. Plug the PA hose into the connector of the drain
valve of the maintenance unit.
8. Route the other end of the PA hose into a collecting
container.
Robert Bosch GmbH
Conversion | 1 687 011 537 | 17
Concluding operations
1. Connect the compressed-air line to the maintenance
unit.
2. Switch on compressed air supply.
3. Check whether compressed air is escaping at the
connection. In the event of a leakage, remove Teflon
sealing tape and reseal connection.
i
Do not reseal the the connection with existing Teflon
sealing tape.
4. Insert the power supply cable into the outlet.
en
|
1 689 989 331 2016-12-15