Input And Functions; Table: Input/Functions; Table: Pulse Events; Display Colours And Their Meaning (For Satura P Ext Only) - Kettler SATURA P Instrucciones De Entrenamiento Y Manejo

Input and functions

Training
Strain
Profile
or
Time/Distance Swichover
Recover y
Display in case of pulse events
Value / Input
Maximal Pulse 121-210
Off
Target pulse
or Fitness
or Manually
Target pulse

Display colours and their meaning (for Satura P EXT only)

The display can illuminate in 3 different colours: blue, green and red. To ensure an obvious notification of pulse events the meaning
of the colours are defined as follows:
The display illuminates blue if the following conditions apply:
• The pulse monitoring is deactivated
• The target pulse monitoring (-/+ 10 pulses) is active but not reached yet.
• The target pulse monitoring is deactivated, the pulse limit monitoring is active but the pulse is below the selected pulse limit.
• You are in the default area.
The display illuminates green:
The pulse is within the range of the target pulse monitoring (-/+ 10 pulses)
The display illuminates red:
If the pulse limit is exceeded while the pulse limit monitoring is active the display turns red.
Stillstand
✔ ✔
Strain
Profile
Distance
Time
Energy
✔ ✔ ✔ ✔ ✔
Max. Pulse
Fat burning
65%
✔ ✔
Fitness
oder 75%
Manually
oder 40-90%
✔ ✔
Target pulse
40-200
✔ ✔ ✔ ✔ ✔
%
}
65%
Fat burning
✔
75%
40-90%
40-200
*note: appears only, if the target pulse was achieved once
✔ ✔ ✔ ✔ ✔ ✔
✔
✔
✔
✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
Exceeding
MAX
✔
+1 +1 +1
+11 –11*
+11 –11*
SM3610-68 / SM3615-68
✔
✔
✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
If the entered training pulse (-11 beats) is
symbol
undercut, the " LO " is shown.
If it is exceeded (+11 beats) the
" HI " is shown.
If the maximum pulse is exceeded, the
"HI" arrow is flashing and the writing
"MAX" is shown.
If the "alarm sound in case of exceeding
the maximum pulse" is activated in indivi-
dual settings (page 13), additional sounds
are output.
symbol
29
GB