Initial Use; Installing The Product; Controlling The Product Via The In-Line Switch; Maintenance And Cleaning - LIVARNO LUX 100321772 Instrucciones De Montaje, De Uso Y De Seguridad

For your safety
Install the product so that it is protected from
dirt and excessive heating.
Always be alert! Always pay attention to what
you are doing and use common sense. Never
use the product if you are having difficulty con-
centrating or do not feel well.
Before use, familiarise yourself with all the in-
structions and diagrams in these instructions,
as well as with the product itself.
In order to disconnect the product completely
from the power supply, the mains supply must
be removed from the socket.

Initial use

Remove all packaging materials before first use.
Do not connect the product to the mains while
it is still in its packaging. Otherwise there is the
risk of overheating.

Installing the product

Note: Ensure that the installation area is clean,
grease-free and dry. Otherwise the functionality
of the self-adhesive pads
Note: Ensure that a plug socket is located in close
proximity to the installation area.
Choose a suitable installation area (mirror etc.).
Connect the connection plug
nection socket .
4
Stick the self-adhesive pads
base of the individual lamps
8
Remove the protective film from the self-adhe-
sive pads .
7
Stick the lamps
1
Ensure that it fits correctly and securely.
Plug the power supply
Note: You can reduce the distance between
the lamps by gently wrapping the cable
1
around the lamp bases
Your product is now ready to use.
Safety / Initial use / Maintenance and cleaning / Disposal
may be impaired.
7
with the con-
5
onto the lamp
7
.
1
to the desired positions.
into the socket.
6
.
8
Controlling the product via the
in-line switch
+
Continuously increase brightness
-
Continuously decrease brightness
Set colour temperature (cold / warm /
neutral white)
ON / OFF switch

Maintenance and cleaning

Use the ON / OFF in-line switch
the product off.
DANGER TO LIFE FROM
ELECTRIC SHOCK!
Before performing any work, first disconnect
the product from the mains power. Unplug the
mains adapter from the socket.
6
Do not use solvents, petrol, etc. These would
damage the product.
Clean the product using a dry, lint-free cloth.
Plug the mains adapter
Your product is now ready to use.
Disposal
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials are
recyclable, dispose of it separately for
better waste treatment. The Triman logo
is valid in France only.
3
to switch
3
into the socket.
6
GB/IE 15