Festo DGEA Instrucciones De Utilizacion página 32

DGEA−...
6 Requirements for product use
Note
Improper handling can result in malfunctions.
· Be sure to always comply with the specifications in this chapter.
· Note the warnings and instructions on the product and in the relevant oper
ating instructions.
· Compare the limit values specified in these operating instructions with your
application (e.g. forces, torques, temperatures, masses).
Only compliance with the load limits allows operation of the product in
compliance with the relevant safety regulations.
· Take into consideration the ambient conditions at the location of use.
Corrosive elements in the environment (e.g. ozone) will reduce the service life
of the product.
· Observe the regulations of the trade association, German Technical Control
Board (TÜV), the VDE or relevant national regulations.
· Remove the packaging such as foils, caps, cardboard and protective wax.
The packaging is intended for recycling (except for: oiled paper = other waste).
· Use the DGEA in its original state without any unauthorised modifications.
· Avoid damaging the DGEA or getting it excessively dirty.
Otherwise damage might occur to the toothed belt. This reduces the safety
and service life of the DGEA.
· Apply power to the drive motor, at first limited to low speeds and torques.
This prevents uncontrolled movements.
· Use the DGEA only in conjunction with a separately switched EMERGENCY
STOP mechanism.
32
Festo DGEA−... 0904b English