System Utility; Wavelength Reset - Auxilab 4260/50 Manual De Usuario

Step 2. Setup Wavelength
Press to go into wavelength setting interface，input all the
wavelength value one by one by the numeric keypad. Press
confirm, press
Step 3. Set Photometric Mode
Press to set the photometric mode， use
"Abs. " or "T%" mode, press
Step 4. Measure Samples
Put the sample to be measured in the main light path and put
Reference in the reference light path, press
test result will display in the data table.
WL: 500.0nm
Multi-Wavelength Test---3 WL
No. WL(nm)
300.0
310.0
320.0
Setup

14. System Utility

Main menu, press
EN TER
press to confirm.
WL: 500.0nm
Main Menu
Basic Mode
①
Quantitative Mode
②
Wavelength Scan
③
Kinetics Mode
④
DNA/Protein Mode
⑤
Multi-Wavelength Mode
⑥
System Utility
⑦
Cancel Move Up

Wavelength Reset

1
Press or use
to begin the calibration. During the course, opening the lid of the
ES C
to return.
10:00:00
D2
W
Abs
Search
Scroll
Mode
7
PQRS or use ,
10:00:00
D2
W
Move Dn Select
, to choose "Wavelength Reset" then press
EN TER
to confirm.
WL: 500.0nm
Multi-Wavelength Test---3 WL
No. WL(nm)
1 300.0
310.0
320.0
Setup Mode
to select "System Utility" and
WL: 500.0nm
System Service Routines
Wavelength Reset
①
Printer Setup
②
Lamp Service
③
Clock Setup
④
Refresh Dark Current
⑤
Connect to PC
⑥
Beeper On/Off
⑦
Cancel
EN TER
, to select
S TART
S TOP to measure, the
10:00:00
D2
W
Abs
1.011
1.205
0.093
Search
Scroll
10:00:00
D2
W
Move Dn Select
to
EN TER