Auxilab 4260/50 Manual De Usuario página 65

Unscrew the 2 screws on the light chamber cover and remove it.
Step 5. Replace the D2 lamp
Unscrew the 2 screws on the D2 Flange (No.1), unplug the connector
in the Power Board (No. 2) and remove the D2 lamp. Draw on the
cotton glove and replace a new lamp. Fix the 2 screws and plug the
connector again.
Step 6. Replace W lamp
Pull out the defected W lamp and draw on the cotton glove. Insert
the new W lamp as deep as possible on the lamp seat.
2
W
Lamp
Lamp
Cover
D2
Lamp
1