Connect To Pc; Beeper On/Off; Refresh System Baseline; Deleted Entire Saved Files - Auxilab 4260/50 Manual De Usuario

EN TER
to confirm. Then the system begins to refresh Dark Current.
Note: During the course, open the lid of the compartment is prohibited.

Connect to PC

6
MN O
Press or use
go into waiting interface. When the instrument was connected to PC, it
displays "Controlled by PC".
WL: 500.0nm
System Service Routines
Wavelength Reset
①
Printer Setup
②
Lamp Service
③
Clock Setup
④
Refresh Dark Current
⑤
Connect to PC
⑥

Beeper On/Off

⑦
Cancel
Beeper on/off
7
Press PQRS or use
switch on or switch off the beeper.

Refresh System Baseline

8
TUV
Press or use
EN TER
to confirm. Then the system will scan the baseline. During this
course, opening the lid of the compartment is prohibited.

Deleted Entire Saved Files

Use , to choose "Deleted Entire Saved Files" and press
confirm. Then the system ask you "Delete entire files, are you sure?",
use , to choose "Yes" , then all the files in the RAM will be
deleted.

Restore Default Settings.

Use , to choose "Restore Default Settings" and press
Confirm, then the system will restore the initialization.
, to choose "Connect to PC", and press
10:00:00
D2
W
Move Dn Select
, to choose "Beeper on/off" and press
, to choose "Refresh System Baseline" and press
WL: 500.0nm
Connecting to Computer...
Press ESC to return...
EN TER
to
10:00:00
D2
W
EN TER
to
EN TER
to
EN TER
to