Preface; Introduction; Identification Of The Product; Technical Specifications - PLYMOVENT MOBILEGOplus Manual De Instalación Y De Uso

pREFacE

using this manual
This manual is intended to be used as a work of reference for
professional, well trained and authorised users to be able to
safely install, use, maintain and repair the product mentioned
on the cover of this document.
pictograms and symbols
The following pictograms and symbols are used in this manual:
Tip
Suggestions and recommendations to simplify
carrying out tasks and actions.
aTTENTioN
A remark with additional information for the user. A
remark brings possible problems to the user's
attention.
cauTioN!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop or
the environment.
WaRNiNg!
Procedures which, if not carried out with the
necessary caution, may damage the product or
cause serious personal injury.
cauTioN!
Denotes risk of electric shock.
WaRNiNg!
Fire hazard! Important warning to prevent fire.
WaRNiNg!
Explosion hazard! Important warning to prevent
explosions.
personal protective equipment (ppE)
Instruction to use respiratory protection when you
do service, maintenance and repair jobs, as well as
during functional testing. We recommend to use a
half-face respirator according to EN 149:2001 +
A1:2009, classe FFP3 (Directive 89/686/EEC).
personal protective equipment (ppE)
Instruction to use protective gloves when you do
service, maintenance and repair jobs.
Text indicators
Listings indicated by "-" (hyphen) concern enumerations.
Listings indicated by "•" (bullet point) describe steps to
perform.
Service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. He will always be willing to
help you. Make sure you have the following specifications at
hand:
- product name
- serial number
You can find these data on the identification plate.
1

iNTRoducTioN

1.1

Identification of the product

The identification plate contains, among other things, the
following data:
- product name
- serial number
0000115336/010518/0 MobileGo 60Hz
plus
- supply voltage and frequency
- power consumption
1.2 general description
The MobileGo is a mobile filter unit with an integrated fan
plus
and an extraction arm. It features a pre filter cassette and a
HEPA filter cassette (both disposable). Thanks to the four
transport wheels (two of which are swivel casters with brake),
the MobileGo is suitable to be used in relatively small
plus
facilities or near sources of pollution without a fixed location.
1.2.1 Intensity of use
The MobileGo is suitable for occasional
plus
activities and for TIG welding.
1.3

Technical specifications

physical dimensions and properties
Material (housing) electro-zinc coated steel
Weight (excl. arm) 85,5 kg (188.5 lbs)
Filters
Pre filter cassette:
- material polyester
- filter surface 1 m² (10.8 ft²)
- filter classification ISO Coarse 70% according to ISO 16890
HEPA filter cassette:
- material glass fibre
- filter surface 26 m² (280 ft²)
- efficiency class MERV 16 according to ASHRAE 52.2
Washable no
Extraction arm
Type metal tube arm (KUA)
Length 2 or 3 m
Diameter Ø 160 mm (6.3 in.)
Weight:
- KUA-2 12 kg (26.5 lbs)
- KUA-3 15,5 kg (34.2 lbs)
-
Fan
Fan type radial
Extraction capacity max. 1100 m�/h (600 CFM)
Fan speed 3400 rpm
Electrical data
Power consumption 1,1 kW (1.5 HP)
Available connection - 115V/1ph/60Hz
voltages
Motor design IEC
Energy efficiency n.a.
Mains cord 5 m
Plug B (NEMA 5-15P)
Certification UL (on electrical components only)
1.3.1 Dimensions
Refer to Fig. I on page 24.
1.4

Working range

Refer to Fig. II on page 24.
1. approx. 1 coil of solid wire or 7,5 kg (16.5 lbs) of electrodes per month
2. approx. 2 coils of solid wire or 15 kg (33 lbs) of electrodes per month
to regular welding
1 2
EN - 3